Spinshot Australia - Delivery Nationwide - $75

External Battery Pack - Installation Instructions and User Guide

The external battery pack consists of the 3 parts:

  1. external battery module (to be installed onto the machine)
  2. dual ended connecting cable
  3. battery bag 
Installation instructions for the external battery module:
  1. Remove the plate on your machine that covers the battery cage - remove the wheel first and unscrew the four screws
  2. Disconnect the red and black cables inside the machine from the battery terminals and remove the battery from the machine
  3. Connect the red and black aforementioned cables inside the machine to the red and black terminals of the external battery module - black to black & red to red
  4. Attach the module to the machine with the four screws and replace the wheel

Connecting the battery to the machine

  1. Using the dual ended cable provided and the battery, connect the red cable to the red battery terminal and the black cable to the black battery terminal. Ensure these connections are very secure. 
  2. Place the battery inside the battery bag
  3. Connect the other end of the cable to the port of the external battery module
Charging the external battery
  1. Disconnect the battery connecting cable from the machine
  2. Plug the charger into the cable's charging port 
  3. Plug the charger into a power socket and switch the power on
  4. The red light on the charger will turn green when the battery is charged